Motor Speed Control, Solid State, Model KBWC-16K (H6323), 6 AMPS - 120 V.A.C. @25°C. Factory set to reduce to 65VAC under motor load. (72 VAC with 100 Watt load)
The manufacturer reserves the right to use alternate motors from
alternate vendors that meet the operating requirements of the fan
but may have slightly different specifications.
Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.
Miami Dade Impact and Wind Load Certification - Miami Dade County Product Control Approved. Florida Building Code approval. Curbs Must Be 16 Gauge Aluminized. MPU Curb Clips ordered seperately.
White Epoxy Coating For 11" or smaller Fan. Consult factory for other colors. Epoxy Part A = Serwin Williams p/n B62WZ111 (AX = A0006230), Hardener Part B = Sherwin Williams p/n B60VZ70 (AX = A0006231)
Line Voltage Thermostat, 120 or 240 volt, used as fan thermostat in cooling applications. Close on temperature rise. 90-130 degree dial. 2E340. 13.8 amps at 120V, 10 amps at 240V.
