Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.



DX Coil

31.5X27.0, 2 CIRCUIT DX COIL, 0.625 X .02 TUBING, 0.0075 ALUMINUM FINS, GALV STEEL CASING, 1.625"/0.875" SWEAT CONNECTIONS, 124.47MBH 5EJ0804B-1. REPLACED BY PART # 4EZ0903H-031.50 X 027.00
DX Evaporator Coil

Single and dual circuits allow precise capacity control. Unique interlaced circuiting option assures uniform refrigerant distribution over the entire face area of the coil. Wide fin spacing availability reduces the affect of frost build up in low temperature applications. For use in central systems or duct application.

DX Coil
Tubing is 3/8" to 1/2" O.D. copper, 5/8" O.D. copper.
Standard, single compressor.
Row control, 2 compressor circuits.
Interlaced, 2 compressor circuits.
Rows 2,3,4,5,6,8,10,12
Fin surface, New Ripple (peak and valley) or flat.
Casing, Galvanized Steel.
Connections, Copper Sweat.
Vents and drains are standard on all coils.

Dx Cooling should be used in areas of high humidity. Dx cooling is ideally suitable for use in restaurants, hospitals, nursing homes, hotels, schools, airports and many other similar facilities.

Additional Information:
Modular DX System Installation Instructions
Operation and Installation Manual
Operation and Installation Manual by Heatcraft
Condenser Submittals
Cooling Formulas
Cooling Process on the Psychrometric Chart
Design Conditions by Location
Dual Evap, Single Condenser Piping
DX Coil Specifications
Housing Size Submittal Sheet
MUA Cooling Application Map
Psychrometric Chart
Thermal Expansion Valve Installation
Sight Glasses
Thermal Expansion Valves