|
|
Chilled Water Coil Module
|
|
CWCM2-4
|
|
CW Coil Module for Size 2 Modular Fans - 1,500 thru 5,300 CFM (20 Ton, 5WS1404B-37.5x36.0) Not stocked. Allow 5-6 weeks lead time. Temperature controls, mixing valves, thermostats, and freeze protection by others.
|
|
|
|
|
Chilled Water Coil Module
|
|
This Modular Chilled Water Coil housing has been designed so that there is
easy access to either side of the coil. Over sized doors offer plenty of
room through which to clean and maintain the coil from either side of the
housing. Blank off plates secure the coil and help maintain velocity across
the coil. Modular design also lends its self to easier installations since
modules bolt together on location. Cooling applications are most commonly used
in hot fluid systems for comfort conditioning of a forced air stream and in
process systems for drying processes. The collector header design with internal
baffles provides circuiting flexibility while eliminating the need for return bends,
while the splayed header design uses return bends for circuiting in lieu of a collection
header. The term "splayed" means that the coil headers are offset outward from the coil
tubes. The splayed header coil always has same end connections.
|
| |
|
|
|
- Easy access to both sides of the coil making maintenance on the coil easier.
- Fully removable access doors on both sides of the housing.
- Coil connections protrude from the housing making installation easier.
- Housing constructed from G90 galvanized steel.
- Blank off plates secure the coil and maintain velocities.
- Easy bolt together modular design allows you to improve installation times, modules are smaller and lighter than standard all in one units.
- Coil tubes are .020 copper.
- Coil Rows (4).
- Fin are made from .0075 Aluminum.
- Casing, Galvanized Steel.
- Connections, 2.5 or 3.0" MPT Carbon Steel.
- Vents and drains are standard on all coils.
- 1" thick insulation installed inside coil module housing
|
|
|
|
