Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.
|Double Wall Chimney Duct Specification|
Furnish double wall, factory built chimney system for installation with negative or positive pressure commercial or industrial applications, Category 1 Flue Duct. Products shall be UL listed to UL103, UL103HT, CAN/ULC-S629-M87 and ULC/ORD-C-959-1993. Model DW-2R HT is listed for a continuous operation at 1000 degrees F and intermittent temperatures of 2100 degrees F in the United States. Model DW-2R HT are listed for a continuous operation at 600 degrees F and intermittent temperatures of 2100 degrees F in Canada. This chimney system is rated for use at a maximum 60 inches water column internal positive pressure applications.
The duct sections shall be constructed of an inner duct wall and an outer wall with insulation in between. The inner duct wall shall be constructed of .036 inch thick, 430 type stainless steel and be available in diameters 8" through 16". The outer wall shall be constructed of stainless steel at a minimum of .024 inch thickness. The duct shall include 2 layers of Super Wool 607 Plus insulation or Insulfrax Elite Blanket between the inner and outer wall. Chimney joints shall be held together by means of formed V clamps and sealed with 3M Fire Barrier 2000+. Chimney systems being used on positive pressure appliances will require positive pressure rings to be installed at each joint in the system. The positive pressure ring is inserted into the chimney and sealed with 3M Fire Barrier 2000 +. Chimney joints shall be held together by means of formed V clamps and sealed with 3M Fire Barrier 2000+. The duct wall assembly shall be tested and listed at 2" inch clearance to combustibles.
*DW - 2R TYPE HT: 2" clearance to combustibles from the surface of the duct outer shell.
The Double Wall Ductwork Series has been certified by UL. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. Product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.
Model DW-2R Type HT is UL Listed under file number MH60233 and complies with UL103, UL103HT, CAN/ULC-S629-M87, and ULC/ORD-C959-1993.