Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 
DD7HPFA Parts
Motors, Pulleys, & Motor Specific Parts
Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor
Lookup Part!  - CK48HB06K01-50HZ 0.25 1 220 V 2.6 0.5" 48 21 lbs 1435 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
Lookup Part!  - CK48HB06K01-60HZ 0.25 1 115/208-230 V 4.5/2.5-2.3 0.5" 48 21 lbs 1735 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
Lookup Part!  - B606 0.25 1 277 V 2.1 0.5" 48Z 14 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts
Lookup Part!  - B607 0.333 1 277 V 2.5 0.5" 48Z 15 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts
Lookup Part!  - CK48HB07J01-50HZ 0.333 1 220 V 3.3 0.5" 48 23 lbs 1435 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
Lookup Part!  - CK48HB07J01-60HZ 0.333 1 115/208-230 V 5.8/3.2-2.9 0.5" 48 23 lbs 1735 HSSA
ODP (Open Drip Proof) Pulleys
Show parts

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.
Replacement Parts
Part
Lookup Part!  - [4 used] 800043 A0005678 - Bolt Whiz 3/8-16 X 1 1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
Lookup Part!  - [12 used] 800032 A0005688 - Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 7/8" Large Flange Diameter, 11/32" Overall Height
Lookup Part!  - [12 used] 800034 A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
Lookup Part!  - [1 used] F2100010 Air Cut-Off Plate 7" Dia. Hole For BDCR7 (620248)
Lookup Part!  - [1 used] F5020011 Baffle 7 1/2" Dia. Ins. Venturi X 5 1/4" Height, .064 x 23.5" 1100-0 Alum. (Spun) (-0 Drill 1.500 Hole) (-1 No Hole) (620067), With Welded Drain.
Lookup Part!  - [1 used] F8040011-S BASE, 20GA GALVANIZED, BDU11,BDCR7-11,DU25,30,33 -ORDER WITH 620154
Lookup Part!  - [2 used] UCP204-12-AH-SP4 Bearing 3/4" pillow block bearing with cast housing and grease fitting. (8B0750) 1/4-28 x 1/8 Socket Set Screw (2@62°). Serrated Tip Set Screw With Loctite Patch. Set Screw Torque = 85 inch lbs. Grease fitting on opposite side of standard.
Lookup Part!  - [1 used] F2361425 Bird Screen - 1/2" X 1/2" (5" X 56") Wire Screen for Upblast & Downblast Fans DU/DR-25H/30H/33H, BDU/BDCR11, Galv after welded wire cloth.
Lookup Part!  - [4 used] 800048 Bolt Whiz 1/4-20 X 1/2, Steel
Lookup Part!  - [2 used] LT 1/2 Conduit Conduit 1/2" Flexible - Non Metallic Gray, For Use With Non Metallic Liquid Tight Connectors.
Lookup Part!  - [1 used] ETL-Label Label - ETL Information Label. Label located in job docs should be printed and shipped.
Lookup Part!  - [4 used] 800113-D40 Motor Frame Vibration Eliminator 1 3/8 Out. Dia. X 3/4" Tall, Rubber (Black with Marking) New Style, Shear 45 lbs, Compression 100 lbs. 3/8-16 x 5/8 dual studs. Durometer = 40
Lookup Part!  - [1 used] F8020011 Motor Plate / Angles Weldment (12 1/4" X 6 1/2" Mounting Holes) For BDU11 / BDCR87,8,9,11 (620046)
Lookup Part!  - [8 used] 800031 Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert
Lookup Part!  - [1 used] F2180013 Shaft 3/4" X 16", Material 1045 Cold Drawn Steel. (620102)
Lookup Part!  - [2 used] 800104 Shaft Key 3/16" X 3/16" X 1 1/4" Long, Steel
Lookup Part!  - [1 used] SKID-3237 Skid - 32" X 37" - Used For BDU 11, BDCR 7, 8, 9 & 11, DU/DR 25, 30 & 33.
Lookup Part!  - [4 used] F2200006 Standoff Hex Head MF 1/4-20 4625.2520A 1/2" Dia. I.D. Hex, Zinc Plated Steel
Lookup Part!  - [1 used] F5040011-S TOP PLATE, 20GA GALVANIZED, BDU11,BDCR7,8,9,11 DU25,30,33 (MOTOR MOUNT)
Lookup Part!  - [4 used] F8030011-P Vertical Brace Assy With PEM Nut. 1 1/8" X 10 7/8", 16 Ga. Galv. Steel For BDU11 / DU33 / BDCR11 (A0025410).
Lookup Part!  - [4 used] 800011 Washer 1/4 Dia. Ins. X 5/8 Dia. Out. X 1/16 Thk., Steel - 360 PER lbs.
Lookup Part!  - [8 used] 800014 Washer Nylon 1/4 Dia. Ins. X 9/16 Dia. Out. X 1/16 Thk., Nylon (Color White)
Lookup Part!  - [4 used] 5/16-18 WHIZNUT Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height.
Curbs
Part
Lookup Part! CRB19.5X4E ROOF CURB - 19.5" Square X 4" High
Lookup Part! CRB19.5X6E ROOF CURB - 19.5" Square X 6" High
Lookup Part! CRB19.5X8E ROOF CURB - 19.5" Square X 8" High
Lookup Part! CRB19.5X8E ROOF CURB - 19.5" Square X 8" High
Lookup Part! CRB19.5X9E ROOF CURB - 19.5" Square X 9" High
Lookup Part! CRB19.5X10E ROOF CURB - 19.5" Square X 10" High
Lookup Part! CRB19.5X12E ROOF CURB - 19.5" Square X 12" High
Lookup Part! CRB19.5X12-BTC BOLT TOGETHER ROOF CURB - 19.5" Square X 12" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
Lookup Part! CRB19.5X13E ROOF CURB - 19.5" Square X 13" High
Lookup Part! CRB19.5X14E ROOF CURB - 19.5" Square X 14" High
Lookup Part! CRB19.5X15E ROOF CURB - 19.5" Square X 15" High
Lookup Part! CRB19.5X16E ROOF CURB - 19.5" Square X 16" High
Lookup Part! CRB19.5X18E ROOF CURB - 19.5" Square X 18" High
Lookup Part! CRB19.5X20E ROOF CURB - 19-1/2" sq. x 20" high.
Lookup Part! CRB19.5X20L-BTC BOLT TOGETHER ROOF CURB -19.5" Square X 20" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
Lookup Part! CRB19.5X22E ROOF CURB - 19-1/2" sq. x 22" high.
Lookup Part! CRB19.5X22L-BTC BOLT TOGETHER ROOF CURB -19.5" Square X 22" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
Lookup Part! CRB19.5X23E ROOF CURB - 19-1/2" sq. x 23" high.
Lookup Part! CRB19.5X24E ROOF CURB - 19-1/2" sq. x 24" high.
Lookup Part! CRB19.5X24.5E ROOF CURB - 19-1/2" sq. x 24-1/2" high.
Lookup Part! CRB19.5X26E ROOF CURB - 19.5" Square X 26" High
Lookup Part! CRB19.5X33E CURB - 19.5" Square X 33" High For Exhaust Fans
Lookup Part! CRB19.5X34E CURB - 19.5" Square X 34" High For Exhaust Fans
Lookup Part! CRB19.5X35E CURB - 19.5" Square X 35" High For Exhaust Fans
Lookup Part! CRB19.5X36E CURB - 19.5" Square X 36" High For Exhaust Fans
Lookup Part! CRB19.5X39E CURB - 19.5" Square X 39" High For Exhaust Fans
Lookup Part! CRB19.5X40E ROOF CURB - 19-1/2" sq. x 40" high.
Lookup Part! CRB19.5X42E ROOF CURB - 19-1/2" sq. x 42" high.
Lookup Part! CRB19.5X44E ROOF CURB - 19-1/2" sq. x 44" high.
Lookup Part! CRB19.5X45E ROOF CURB - 19-1/2" sq. x 45" high.
Lookup Part! CRB19.5X48E ROOF CURB - 19-1/2" sq. x 48" high.
Lookup Part! CRB19.5X50E ROOF CURB - 19-1/2" sq. x 50" high.
Lookup Part! CRB19.5X52E ROOF CURB - 19-1/2" sq. x 52" high.
Lookup Part! CRB19.5X54E ROOF CURB - 19-1/2" sq. x 54" high.
Lookup Part! CRB19.5X55E ROOF CURB - 19-1/2" sq. x 55" high.
Lookup Part! CRB19.5X63E ROOF CURB - 19-1/2" sq. x 63" high.
Lookup Part! CRB19.5X64E ROOF CURB - 19-1/2" sq. x 64" high.
Lookup Part! CRB19.5X65E ROOF CURB - 19-1/2" sq. x 65" high.
Lookup Part! CRB19.5X78E CURB - 19.5" Square X 78" High For Exhaust Fans
Lookup Part! CRB19.5X80E CURB - 19.5" Square X 80" High For Exhaust Fans
Options
Parts
Lookup Part! I 15 BDD w/ 120/240V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 120/240V
Show parts
Lookup Part! I 15 BDD w/ 24V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 24V
Show parts
Lookup Part! WALLMOUNT 20.5" SQ. x 2" Wall Mount Bracket - 20.5" square x 2" for fans with 21" square base and with 16" centered square hole.
Lookup Part! WALLMOUNT 20.5" SQ. x 5" Wall Mount Bracket - 20.5" square x 5" for fans with 21" square base, with 16" centered square hole. Used when gravity damper is ordered.
Lookup Part! FAN HEAT BAFFLE Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
Show parts
Lookup Part! XB-2 Extra Set of V-Belts. Only to be ordered as fan option at time fan is ordered.
Lookup Part! EYEBOLTS-4 Eye Bolt 4 - Eye Bolts Are Installed On The Outside Of The Apron / Hood. Used For Guy Line Tie Off On Fans With 4 Tie Off Points.
Show parts
Lookup Part! HBKIT-01 HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.
Show parts
Lookup Part! MIAMI-DADE NOA-1 Aluminum Downblast 11 Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Downblast size 11. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized.
Show parts
Lookup Part! Through Wall Curb Mount Through Wall Curb Mount Installation Option.
Lookup Part! I 15 BDD Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq.
Lookup Part! Full Crating for Exhaust Fan Full crating for exhaust fans for shipping.
Lookup Part! EPO11-Enamel Tan Enamel Coating For 11" or smaller Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.