Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

0 / 500
0 / 500
0 / 500
0 / 1000

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 
DD9HPFA Parts
Motors, Pulleys, & Motor Specific Parts
Click on a part # to order that part.
Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor
B606 0.25 1 277 V 2.1 0.5" 48Z 14 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts
.2518OS1BSPAO48-75PK 0.25 1 115/208-230 V 4.8/2.4-2.4 0.5" 48 21 lbs 1735 Weg
ODP (Open Drip Proof) Pulleys
Show parts
.2518OS1BSPAO48-75PK-50HZ 0.25 1 220 V 2.7 0.5" 48 21 lbs 1435 Weg
ODP (Open Drip Proof) Pulleys
Show parts
CK48HB07J01-60HZ 0.333 1 115/208-230 V 5.8/3.2-2.9 0.5" 48 23 lbs 1735 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
CK48HB07J01-50HZ 0.333 1 220 V 3.3 0.5" 48 23 lbs 1435 HSSA
ODP (Open Drip Proof) Pulleys
Show parts
B607 0.333 1 277 V 2.5 0.5" 48Z 15 lbs 1725 Marathon
ODP (Open Drip Proof) Pulleys
Show parts

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.
Replacement Parts
Part Per Unit List 
F2100012
[1 used]
Air Cut-Off Plate 9" Dia. Hole For BDCR9 (620250) $20.79 Order
F5020011
[1 used]
Baffle 7 1/2" Dia. Ins. Venturi X 5 1/4" Height, .064 x 23.5" 1100-0 Alum. (Spun) (-0 Drill 1.500 Hole) (-1 No Hole) (620067), With Welded Drain. $76.40 Order
F8040011-S
[1 used]
BASE, 20GA GALVANIZED, BDU11,BDCR7-11,DU25,30,33 -ORDER WITH 620154 $38.52 Order
UCP204-12-AH-SP4
[2 used]
Bearing 3/4" pillow block bearing with cast housing and grease fitting. (8B0750) 1/4-28 x 1/8 Socket Set Screw (2@62°). Serrated Tip Set Screw With Loctite Patch. Set Screw Torque = 85 inch lbs. Grease fitting on opposite side of standard. $15.39 Order
F2361425
[1 used]
Bird Screen - 1/2" X 1/2" (5" X 56") Wire Screen for Upblast & Downblast Fans DU/DR-25H/30H/33H, BDU/BDCR11, Galv after welded wire cloth. $1.83 Order
800048
[4 used]
Bolt Whiz 1/4-20 X 1/2, Steel $0.15 Order
800043
[4 used]
Bolt Whiz 3/8-16 X 1-1/2, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks) $1.05 Order
LT 1/2 Conduit
[2 used]
Conduit 1/2" Flexible - Non Metallic Gray, For Use With Non Metallic Liquid Tight Connectors. $1.83 Order
F5210011
[1 used]
Hood Apron For BDCR7,8,9,11 / BDCR7,8,9,11RA / DD7,8,9,10FA (Spun) (620210) .08 x 35" 1100-0 Alum. $148.95 Order
F8010012
[1 used]
HP Wheel Assembly 11 3/4" Dia. Top X 8 3/8" Dia. Ins. Bottom X 5" High. $95.78 Order
800113-D40
[4 used]
Motor Frame Vibration Eliminator 1 3/8 Out. Dia. X 3/4" Tall, Rubber (Black with Marking) New Style, Shear 45 lbs, Compression 100 lbs. 3/8-16 x 5/8 dual studs. Durometer = 40 $1.70 Order
F8020011
[1 used]
Motor Plate / Angles Weldment (12 1/4" X 6 1/2" Mounting Holes) For BDU11 / BDCR87,8,9,11 (620046) $33.78 Order
800031
[8 used]
Nut Nylon Insert 1/4-20, NILN 1420Z, Steel With White Nylon Insert $0.03 Order
800034
[12 used]
Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange $0.18 Order
F2180013
[1 used]
Shaft 3/4" X 16", Material 1045 Cold Drawn Steel. (620102) $11.87 Order
800104
[2 used]
Shaft Key 3/16" X 3/16" X 1 1/4" Long, Steel $0.18 Order
SKID-3237
[1 used]
Skid - 32" X 37" - Used For BDU 11, BDCR 7, 8, 9 & 11, DU/DR 25, 30 & 33. $14.21 Order
F2200006
[4 used]
Standoff Hex Head MF 1/4-20 4625.2520A 1/2" Dia. I.D. Hex, Zinc Plated Steel $1.57 Order
F5040011-S
[1 used]
TOP PLATE, 20GA GALVANIZED, BDU11,BDCR7,8,9,11 DU25,30,33 (MOTOR MOUNT) $17.51 Order
F8030011-P
[4 used]
Vertical Brace Assy With PEM Nut. 1 1/8" X 10 7/8", 16 Ga. Galv. Steel For BDU11 / DU33 / BDCR11 (A0025410). $3.98 Order
800011
[4 used]
Washer 1/4 Dia. Ins. X 5/8 Dia. Out. X 1/16 Thk., Steel $0.10 Order
800014
[8 used]
Washer Nylon 1/4 Dia. Ins. X 9/16 Dia. Out. X 1/16 Thk., Nylon (Color White) $0.26 Order
800032
[12 used]
Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 3/8"-16 Thread Size, 3/4" Flange Diameter, 11/32" Overall Height $0.61 Order
99904A102
[4 used]
Zinc-Plated Grade 5 Steel Serrated-Flange Locknut, 5/16"-18 Thread Size, 11/16" Flange Diameter, 9/32" Overall Height $1.05 Order
Curbs
Part Per Unit List 
CRB19.5X4E ROOF CURB - 19.5" Square X 4" High $49.36 Order
CRB19.5X6E ROOF CURB - 19.5" Square X 6" High $98.73 Order
CRB19.5X8E ROOF CURB - 19.5" Square X 8" High $98.73 Order
CRB19.5X9E ROOF CURB - 19.5" Square X 9" High $98.73 Order
CRB19.5X10E ROOF CURB - 19.5" Square X 10" High $98.73 Order
CRB19.5X12E ROOF CURB - 19.5" Square X 12" High $98.73 Order
CRB19.5X12-BTC BOLT TOGETHER ROOF CURB - 19.5" Square X 12" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs. $83.14 Order
CRB19.5X13E ROOF CURB - 19.5" Square X 13" High $98.73 Order
CRB19.5X14E ROOF CURB - 19.5" Square X 14" High $98.73 Order
CRB19.5X16E ROOF CURB - 19.5" Square X 16" High $98.73 Order
CRB19.5X18E ROOF CURB - 19.5" Square X 18" High $98.73 Order
CRB19.5X20E ROOF CURB - 19-1/2" sq. x 20" high. $98.73 Order
CRB19.5X20L-BTC BOLT TOGETHER ROOF CURB -19.5" Square X 20" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs. $83.14 Order
CRB19.5X22E ROOF CURB - 19-1/2" sq. x 22" high. $98.73 Order
CRB19.5X22L-BTC BOLT TOGETHER ROOF CURB -19.5" Square X 22" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs. $83.14 Order
CRB19.5X23E ROOF CURB - 19-1/2" sq. x 23" high. $98.73 Order
CRB19.5X24E ROOF CURB - 19-1/2" sq. x 24" high. $98.73 Order
CRB19.5X24.5E ROOF CURB - 19-1/2" sq. x 24-1/2" high. $98.73 Order
CRB19.5X26E ROOF CURB - 19.5" Square X 26" High $98.73 Order
CRB19.5X33E CURB - 19.5" Square X 33" High For Exhaust Fans $98.73 Order
CRB19.5X34E CURB - 19.5" Square X 34" High For Exhaust Fans $98.73 Order
CRB19.5X35E CURB - 19.5" Square X 35" High For Exhaust Fans $98.73 Order
CRB19.5X36E CURB - 19.5" Square X 36" High For Exhaust Fans $98.73 Order
CRB19.5X39E CURB - 19.5" Square X 39" High For Exhaust Fans $98.73 Order
CRB19.5X40E ROOF CURB - 19-1/2" sq. x 40" high. $197.49 Order
CRB19.5X42E ROOF CURB - 19-1/2" sq. x 42" high. $197.49 Order
CRB19.5X44E ROOF CURB - 19-1/2" sq. x 44" high. $197.49 Order
CRB19.5X45E ROOF CURB - 19-1/2" sq. x 45" high. $197.49 Order
CRB19.5X48E ROOF CURB - 19-1/2" sq. x 48" high. $197.49 Order
CRB19.5X50E ROOF CURB - 19-1/2" sq. x 50" high. $296.21 Order
CRB19.5X52E ROOF CURB - 19-1/2" sq. x 52" high. $296.21 Order
CRB19.5X54E ROOF CURB - 19-1/2" sq. x 54" high. $296.21 Order
CRB19.5X55E ROOF CURB - 19-1/2" sq. x 55" high. $296.21 Order
CRB19.5X63E ROOF CURB - 19-1/2" sq. x 63" high. $246.84 Order
CRB19.5X64E ROOF CURB - 19-1/2" sq. x 64" high. $246.84 Order
CRB19.5X65E ROOF CURB - 19-1/2" sq. x 65" high. $246.84 Order
CRB19.5X78E CURB - 19.5" Square X 78" High For Exhaust Fans $246.84 Order
CRB19.5X80E CURB - 19.5" Square X 80" High For Exhaust Fans $278.05 Order
Options
Part Per Unit List 
I 15 BDD w/ 120/240V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 120/240V $136.62 Order
Show parts
I 15 BDD w/ 24V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. Actuator is 24V $159.51 Order
Show parts
WALLMOUNT 20.5" SQ. x 2" Wall Mount Bracket - 20.5" square x 2" for fans with 21" square base and with 16" centered square hole. $57.73 Order
WALLMOUNT 20.5" SQ. x 5" Wall Mount Bracket - 20.5" square x 5" for fans with 21" square base, with 16" centered square hole. Used when gravity damper is ordered. $86.61 Order
Warranty-Motor-1-5 3 Year Extended Warranty for Fan Motor. Parts only; does not include labor. $51.96 Order
FAN HEAT BAFFLE Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate. $82.84 Order
Show parts
XB-2 Extra Set of V-Belts. Only to be ordered as fan option at time fan is ordered. $23.09 Order
EYEBOLTS-4 Eye Bolt 4 - Eye Bolts Are Installed On The Outside Of The Apron / Hood. Used For Guy Line Tie Off On Fans With 4 Tie Off Points. $109.35 Order
Show parts
HBKIT-01 HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized. $51.96 Order
Show parts
MIAMI-DADE NOA-1 Aluminum Downblast 11 Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Downblast size 11. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 16 Gauge Aluminized. $36.68 Order
Show parts
Through Wall Curb Mount Through Wall Curb Mount Installation Option. $0.00 Order
I 15 BDD Gravity Back Draft Damper - with flange, damper is 15" sq., 2" deep, O.D. of flange is 17" sq. $30.75 Order
Full Crating for Exhaust Fan Full crating for exhaust fans for shipping. $86.61 Order
EPO11-Enamel Tan Enamel Coating For 11" or smaller Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Adds two weeks to the lead time of unit. $577.38 Order
EPO11-Epoxy White Epoxy Coating For 11" or smaller Fan. Consult factory for other colors. Epoxy Part A = Serwin Williams p/n B62WZ111 (AX = A0006230), Hardener Part B = Sherwin Williams p/n B60VZ70 (AX = A0006231) Adds two weeks to the lead time of unit. $577.38 Order