Rep Our Products

Are you interested in representing CaptiveAire and selling our products?
Please fill out the following form, and we will contact you soon.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

 
DU12HFA Parts
Motors, Pulleys, & Motor Specific Parts
Motor HP Phs Voltage FLA Shaft Frame Weight RPM Vendor
CK42BS04M01-50-115 0.18 1 115 V 2.4 0.5" 9 lbs 1400 HSSA
ODP (Open Drip Proof)  
Show parts
CK42BS04M01-50-230 0.18 1 230 V 1.2 0.5" 9 lbs 1400 HSSA
ODP (Open Drip Proof)  
Show parts
CK42BS04M01-60-115 0.18 1 115 V 1.9 0.5" 10 lbs 1620 HSSA
ODP (Open Drip Proof)  
Show parts
CK42BS04M01-60-230 0.18 1 230 V 1 0.5" 9 lbs 1620 HSSA
ODP (Open Drip Proof)  
Show parts
BMN42-180I1-60-115 0.25 1 115 V 2.9 0.5" 42 10 lbs 1800 Telco Intercontinental Corp
TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)  
Show parts
BMN42-180I1-50-115 0.25 1 115 V 2.9 0.5" 42 10 lbs 1800 Telco Intercontinental Corp
TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)  
Show parts
BMN42-180I2-60-230/277 0.25 1 208-230-277 V 1.9-1.8-1.5 0.5" 42 10 lbs 1800 Telco Intercontinental Corp
TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)  
Show parts
BMN42-180I2-50-230/277 0.25 1 208-230-277 V 1.9-1.8-1.5 0.5" 42 10 lbs 1800 Telco Intercontinental Corp
TEAO-ECM (Totally Enclosed Air Over Electronically Commutated Motor)  
Show parts
CK42BS04M02-50-115 0.18 1 115 V 2.4 0.5" 42 9 lbs 1400 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts
CK42BS04M02-50-230 0.18 1 230 V 1.2 0.5" 42 9 lbs 1400 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts
CK42BS04M02-60-115 0.18 1 115 V 1.9 0.5" 42 9 lbs 1625 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts
CK42BS04M02-60-230 0.18 1 230 V 1 0.5" 42 9 lbs 1625 HSSA
TEFC (Totally Enclosed Fan Cooled)  
Show parts

The manufacturer reserves the right to use alternate motors from alternate vendors that meet the operating requirements of the fan but may have slightly different specifications.
Replacement Parts
Part
800034
[4 used]
A0005690 - Nut Whiz 1/4-20, SFLN1420LZ, Steel, Large Flange
0120763.0800
[4 used]
A0031100 - 1"L, 1/4-20 Matpoint, Self Aligning, Hex Head, Grade 5 Bolt
F5061516
[1 used]
Apron 14 3/16" Dia. Out. Bottom X 22" Dia. Ins. Top X 14 1/2" Height, .080 x 32" 1100-0 Alum. For DU12 / DU12FA / DU12RA (Spun) (620326)
F8041516-S
[1 used]
Base Assembly For DU12 / DR12
800041
[7 used]
Bolt Whiz 10-32 X 1/2, SFB103212Z, Steel Grade 5 Minimum (3 Evenly Spaced Radial Marks)
F2140014
[1 used]
Cooling Tube 3 1/2" Out. Dia. X 5 7/8" Long, .080 Wall Thk. Extruded Alum. For BDU11, DU12H, DU30 & DU33 (620307)
F2100001
[2 used]
Cooling Tube Grommet 3 1/2" Ins. Dia., 4 1/2" Out. Dia., 3/8" Thk., Black Silicone Rubber(620047)
MANUAL EXHAUST
[1 used]
Manual for PRVs
F5151516-S
[1 used]
Motor Cover 14 5/16" Dia. Ins. X .875" Height, .24GA Galv. (Spun) DU12 Pan Hood
800030
[8 used]
Nut Whiz 10-32, SFLN1032Z, Steel, Large Flange
800036
[8 used]
Nut Whiz 8-32, Steel
SB6-4-RIVET
[2 used]
RIVET - 3/16" Diameter, .126 To .250 Grip Range, SB6-4 Button Head Steel/Steel. Replaced 800075.
F2051516-S
[1 used]
Shaft Wrapper 14 1/4" Dia. Out. X 8 3/4" Height. For DU12
SKID-3237
[1 used]
Skid - 32" X 37" - Used For BDU 11, BDCR 7, 8, 9 & 11, DU/DR 25, 30 & 33.
F5041516-S
[1 used]
TOP PLATE, 20GA GALVANIZED, DU/DR 12 F5041516
F8031516-S
[4 used]
Vertical Brace Assy. 1" X 7 15/16", 14 Ga. Galv. Steel For DU12 / DR12
F8011516
[1 used]
Wheel Assembly 10 1/2" Dia. Top X 8 1/2" Dia. Ins. Bottom X 4 3/16" Height used on DU, DR 12 DD (620319).
Curbs
Part
CRB17.5X8E ROOF CURB - 17.5" Square X 8" High
CRB17.5X9E ROOF CURB - 17.5" Square X 9" High
CRB17.5X12E ROOF CURB - 17.5" Square X 12" High
CRB17.5X12-BTC BOLT TOGETHER ROOF CURB - 17.5" Square X 12" High, 18 GA Galvanized. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB17.5X14E ROOF CURB - 17.5" Square X 14" High
CRB17.5X16E Roof Curb 17-1/2" sq. x 16" high
CRB17.5X18E Roof Curb 17-1/2" sq. x 18" high
CRB17.50X20E ROOF CURB - 17.50" Square X 20" High
CRB17.5X20E Roof Curb 17-1/2" sq. x 20" high
CRB17.50X21E ROOF CURB - 17.50" Square X 21" High
CRB17.5x22E ROOF CURB - 17.5" Square X 22" High
CRB17.5x24E ROOF CURB - 17.5" Square X 24" High
CRB17.5x26E ROOF CURB - 17.5" Square X 26" High
CRB17.5x26L-BTC BOLT TOGETHER ROOF CURB - 17.5" Square X 26" High, 18 GA Galvanized. Vented. Ships Flat. Pitched Curb Option Not Available with Bolt Together Curbs.
CRB17.5x52E Roof Curb 17-1/2" sq. x 52" high
CRB17.5x55E Roof Curb 17-1/2" sq. x 55" high
CRB17.5x61E Roof Curb 17-1/2" sq. x 61" high
Options
Part
ECM Wiring Package - MSC ECM Wiring Package - Exhaust - Manual or 0-10VDC Reference Speed Control -MSC- (TELCO), CCW Rotation
Show parts
ECM Wiring Package-RTC ECM Wiring Package - Manual or 0-10VDC Reference Speed Control -RTC- (TELCO Motor), CCW Rotation
Show parts
52012 Turn-tite Low-Pressure Mechanical Test Plug Steel W/Neoprene Seal, for Pipe ID 3.75". Used for Upblast Fan Wheel Access. - Cut Hole with McMaster Carr Hole Saw 4066A54 With Pilot Bit 4066A79.
GC-CUF Grease Cup for kitchen-duty centrifugal exhaust fans, Box Dimensions 17-1/8 L X 5-1/16 W X 3-3/4 H (20 Gauge) (Includes Down Spout)
Show parts
I 12 BDD w/ 120/240V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq. Actuator is 120/240V
Show parts
I 12 BDD w/ 24V Motor MOTORIZED BACK DRAFT DAMPER - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq. Actuator is 24V
Show parts
WALLMOUNT 18.5"SQ x 2" Wall Mount Bracket - 18.5" square x 2" for fans with 19" square base and with 13" centered square hole.
WALLMOUNT 18.5"SQ x 5" Wall Mount Bracket - 18.5" square x 5" for fans with 19" square base, with 13" centered square hole. Used when gravity damper is ordered.
WBE-10-36 Windband Extension Assembly for Centrifigual Upblast Fan with 10.50" Wheel. 23.760" OD, 36" Height. Constructed of Galvanized Steel Ater 1/1/2016. Includes 3 Quick Release latches & 10 Self Drilling Screws.
Show parts
Warranty-Motor-1-5 3 Year Extended Warranty for Fan Motor. Parts only; does not include labor.
FAN HEAT BAFFLE Insulated Heat Baffle for Exhaust Fans. Type 475FRK 1 inch thick insulation installed on the top side of the top plate and under the motor of upblast and downblast fans. Cut to fit shaft wrapper and around vibration isolators and motor cooling hole. Caulked down to top plate.
Show parts
397-91PSA INSTALLED FAN OPTION Gasketing - Thermeez Woven Ceramic Tape - 1/4" x 1" with adhesive back - Max Temp 1500°F. To be applied between fan base and grease duct. Installed under fan base 1/2" from the inside edge of the base to match up with the curb top flanges.
Show parts
397-91PSA FAN OPTION Gasketing - Thermeez Woven Ceramic Tape - 1/4" x 1" with adhesive back - Max Temp 1500°F. To be applied between fan base and grease duct. Ships loose with fan. Gasket length supplied = perimeter of fan base.
Show parts
HD-HBKIT-LOCKING HINGE KIT - Heavy Duty Hinge kit with locking spring pin for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. 10 GA Galvanized. Note: Requires 16GA curb or 18GA curb with 16GA back plate - (9"x9" cut size).
Show parts
HBKIT-01 HINGE KIT - Standard Hinge kit for exhaust fan roof curbs. Includes Hardware to attach hinge to curb and hinge to base. Ships Loose. Used on Fans with wheels 20 inches or smaller. 12 GA Galvanized.
Show parts
F2051516-CS Shaft Wrapper 14 1/4" Dia. Out. X 7 3/4" Height. For DU12 when used on concession stands. Low Profile Shaft Wrapper.
MIAMI-DADE NOA-1 Aluminum Upblast Miami Dade Impact and Wind Load Certification +150 / -150 PSF - Miami Dade County Product Control Approved. Florida Building Code approval. Roof & Wall Mount Exhaust Curbs up to 20" high must be 20 gauge Aluminized. Roof & Wall Mount Exhaust Curbs above 20" high up to 42" high must be 18 Gauge Aluminized.
Hinge Kit Label Label - Remove The Hinge Kit Label From The Fan Base.
F2361516 Bird Screen - 1/2" X 1/2" (3 3/4" X 46") Wire Screen for Direct Drive Upblast/Downblast Fans (850030) DU/DR12, Galv after welded wire cloth.
Ship Loose Disconnect For Remote Mount Disconnect Switch Loose - Wire Is Extended 10' To Allow Remote Mounting Of The NEMA 3R Enclosure & Switch. Cord Fittings Are Installed In Switch Box. 10-32 Hardware and 7/8" Plug Are Installed In Apron Switch Mounting Holes.
Show parts
2E340 Line Voltage Thermostat, 120 or 240 volt, used as fan thermostat in cooling applications. Close on temperature rise. 80-130 degree dial. 2E340. 13.8 amps at 120V, 10 amps at 240V.
Through Wall Curb Mount Through Wall Curb Mount Installation Option.
I 12 BDD Gravity Back Draft Damper - with flange, damper is 12" sq. 2" deep, O.D. of flange is 14" sq.
Dry Mode Exhaust Current Sensor Mounted In Exhaust Fan For Use With Pool Room Temp Control
Full Crating for Exhaust Fan Full crating for exhaust fans for shipping.
EPO11-Enamel Tan Enamel Coating For 11" or smaller Fan. Consult factory for other colors. Sherwin Williams p/n F75KXN5809-4347, (AX = A0006229) Color: SW2353. Adds two weeks to the lead time of unit.
MS100W Occupancy Sensor, White, 120VAC. 1/2HP, 9 Amp Max (Fan +Light). 300W max LED, 600W max Incandescent. Fits single-gang box.