Double Wall

Chimney

UL103 and UL103HT Rated

Double Wall Chimney High Temperature
Blanket Insulation

Double Wall Chimney

Ideal for use in commercial and industrial applications which require a listed chimney system, such as venting solid fuel appliances or hot water heaters.
  • UL Listed to UL Standard 103, UL103HT, CAN/ULC S-629-M87 and ULC/ORD-C959-1993
  • Duct sections are constructed of an inner wall and outer wall with insulation in between - inner duct is Single Wall (DW Series) and outer shell is stainless steel
  • Inner duct diameters range from 8" to 16"
  • Model 2R Type HT available for Negative Pressure Industrial or Commercial Appliances
  • Model 2R Type HT available for Positive Pressure Industrial or Commercial Appliances
  • Model 2R Type HT for use at maximum 60 inch water column internal pressure when used in Positive Pressure Applications
  • Rated for continuous operation at 1000 degrees F and intermittent operation at 2100 degrees F in United States
  • Rated for continuous operation at 600 degrees F and intermittent operation at 2100 degrees F in Canada
Double Wall Chimney

Clearances

DUCT
MODEL		 INNER
DIAMETER (ID)		 OUTSIDE
DIAMETER		 CLEARANCE TO
COMBUSTIBLES		 CLEARANCE TO
NON-COMBUSTIBLES
DW-2R HT 8" - 16" ID+4 2" 0"
* 2" clearance to combustibles from the surface of the duct outer shell.

Installation Details

Chimney Assembly
Base Cap
Vertical
Support Fire
Stop Vented
Curb Transition
Plate Chimney Cap Ceramic
Gasket Chimney
Dye Penetrant Testing All ductwork is tested at the factory
for quality assurance.

Product Resources

The Double Wall Ductwork Series has been certified by UL. This certification mark indicates that the product has been tested to and has met the minimum requirements of a widely recognized (consensus) U.S. Product safety standard, that the manufacturing site has been audited, and that the applicant has agreed to a program of periodic factory follow-up inspections to verify continued performance.


Model DW-2R Type HT is UL Listed under file number MH60233 and complies with UL103, UL103HT, CAN/ULC-S629-M87, and ULC/ORD-C959-1993.